Tie Mounts
12V 24Ah-A LiFePO4 Battery
2024-10-03 17:00  Visit:401
Price:Unfilled
Send inquiry
12V 24Ah-A LiFePO4 battery
 

 

Use safer lithium iron phosphate batteries(LiFePO4)
 
Integrated Intelligent Battery Management System (BMS):
• Prevent overcharge, overdischarge, and high current inside the
battery to ensure battery safety and reliability.
• Balance each battery to extend battery life.
 
Used to replace lead-acid batteries
 
Use of UPS backup power

 

Electrical Characteristics Charging parameters
Nominal Voltage (V) 12.8V Charge Voltage(V) 14.6V
Nominal Capacity(Ah) 24Ah@0.2C 25℃ Charge current(A) 4.8A(Recommend)
Minimum capacity(Ah) 23.28Ah@0.2C25℃ Max charge current(A) 12A
Nominal Capacity(Wh) 307.2Wh Peak charge current(A) 24A(2s)
Cycle Life ≥2000 Cycles @0.2C/0.2C Charging mode
Constant current /
Constant voltage
 
Discharge parameters Operating Environment
Discharge Cut-offVoltage 10.8V Charge Temperature 0℃ to55℃
Discharge current 12A(Recommended) Discharge Temperature -20℃ to 60℃
Max discharge current 24A Storage Temperature -20℃ to 50℃
 
Other parameters
Shell material ABS+PC
Batterysize 165(L)*125(W)*175(H)mm
Packweight 3.2Kg
Protection Class IP65
Intermal Resistance ≤50mΩ @AC 1kHz
Terminal type M5
Terminal type Authentication Level UN38.3/MSDS

 

 

Usage Note:
 
1. The charging voltage of the battery shall not exceed the parameters in the specification
2. When the battery is in use, the discharge voltage shall not be lower than the parameters in the specification, otherwise the low-voltage protection may be triggered
3. The charging current and discharging current of the battery shall not exceed the parameter range of the specification, otherwise
the battery may be damaged

 

 

 

FAQ
 

 

1.What is the charging efficiency of the12V 24Ah-A LiFePO4 battery?
The charging efficiency of LiFePO4 batteries is as high as over 95%, which means that very little energy is lost during the charging process.

 

2.Do LiFePO4 batteries need to be balanced charged?
Yes, balanced charging helps ensure that the voltage of each battery cell is consistent, extending the life of the battery pack and improving safety.

 

3.What are the common applications of LiFePO4 batteries?
In addition to electric vehicles and energy storage systems, LiFePO4 batteries are also widely used in emergency lighting, electric bicycles, solar energy storage equipment, UPS power supplies, etc.

 

4.What is the C rate of the 12V 24Ah-A LiFePO4 battery?
The C rate indicates how much current the battery can be charged and discharged at. LiFePO4 batteries usually support high C rate discharge, such as 10C or even higher, which is very suitable for applications with high power requirements.

 

5.Does LiFePO4 batteries heat up when charging?
LiFePO4 batteries usually generate a certain amount of heat when charging, but compared with other types of lithium batteries, they generate less heat and are safer.

 

 

https://www.chilbattery.com/

Message

TO: anjiqili

E-mail:

Content:

Contact information
Comment
0